Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Fox Chase
If your Fox Chase chimney is pulling poorly, staining the wall near the smoke chamber, or shedding mortar on the gable, we can help. We’re a chimney and fireplace specialist, not a general handyman, and we work across Fox Chase connecting homeowners with independent local pros who handle real masonry and flue work. Our technicians have up to 8 years of experience, and every job starts with a camera inspection and a photo report you can see yourself before anything is recommended. Call (866) 780-1537. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Fox Chase Homeowners Call Chimney Sweep Holmesburg for Chimney Repair
Fox Chase homeowners tend to know their houses. Many bought into a 1920s or 1950s brick single or twin on purpose, and they want someone who understands what’s actually on the roof, not a quick sweep and a sales pitch. That’s the reputation we work to protect across the neighborhood. When we connect you with a vetted local professional, you get one company accountable from inspection through repair, and the local pro is licensed and insured as the state requires.
Fox Chase sits in the part of Northeast Philadelphia where original masonry stacks are the norm, and word travels between neighbors on the same block. We hear from people who want a straight answer about whether their chimney needs repointing, a crown rebuild, or a liner, and we give it, backed by camera footage. The sweep is booked ahead and the flat-price sweep is agreed before anyone arrives. From there, nothing gets added without evidence you’ve seen. Call (866) 780-1537 to set up an inspection and get a written estimate.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Fox Chase
Most of what we handle in Fox Chase comes back to the same handful of exterior and flue problems. Here’s how the top four services apply to the housing stock you’ll find across the neighborhood.
Mortar Repointing
Repeated cycles of snowmelt soaking brick and then refreezing are what wreck the mortar joints on Fox Chase’s exposed gable stacks. Repointing cuts out the soft, crumbled mortar and packs in fresh material that matches the joint profile, so the stack holds together instead of shedding grit onto the roof. We look closely at joints along the whole stack, not just the ones you can see from the sidewalk.

Spalling Brick Repair
When brick faces pop and flake, that’s spalling, and it’s common on older Fox Chase chimneys where moisture has worked in behind the surface. We replace the damaged brick rather than painting over it, because coating a spalling stack traps the water and accelerates the failure. Once the face is sound, it can be protected properly.

Chimney Waterproofing
Waterproofing is a breathable treatment applied after the masonry is repaired, designed to keep liquid water out while letting the brick dry from the inside. It’s the wrong first step on a crumbling stack, which is why we fix spalling and repoint before sealing anything on a Fox Chase chimney. Done in the right order, it slows the freeze-thaw damage that keeps coming back.

Flashing Repair
Flashing is the metal where the chimney meets the roof, and it’s a frequent source of leaks around Fox Chase homes with additions and re-roofed sections. Cracked or lifting flashing lets water run straight into the attic and down the stack. We repair the seal at the roofline so the brick stays dry where it meets the shingles.
Trusted Brands We Service in Fox Chase
We specify recognized industry-grade materials, and we work with a curated roster of brands that professional chimney technicians actually name: DuraFlex for flexible stainless liner systems, HeatShield for ceramic liner resurfacing, and Famco and Copperfield for chimney caps and related components. The point isn’t the name on the box. It’s matching the right material to your flue type, fuel type, and budget, so a gas-vented stack doesn’t get a liner meant for a wood appliance. If a full replacement isn’t necessary, HeatShield gives us a resurfacing option that addresses deteriorating mortar joints without demolition. You get a fast turnaround on materials and one accountable company from start to finish.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Fox Chase Homes
These are the failures that show up again and again on Fox Chase’s older stacks, and each one is easy to cover up with the wrong fix.
- Cracked clay-tile flues from freeze-thaw. Decades of Philadelphia winters crack the clay tiles on unlined or tile-lined flues, and a quick sweep and a new cap can hide the damage. The camera inspection is what shows it.
- Soft mortar and spalling on the exposed gable stack. The brick on the gable end takes the weather head-on, and it’s tempting to waterproof right over it. That traps moisture and makes the flaking worse instead of stopping it.
- Abandoned coal-era flues and old cleanout doors. Many Fox Chase stacks started life venting a coal furnace and were later re-vented for gas or oil, often without a liner sized for the new appliance. Left open, an orphaned flue or forgotten basement cleanout lets exhaust and creosote odor migrate indoors.
- Cracked crowns letting water into the brick. A crown cracked over a winter lets meltwater seep in and refreeze, which is why spring and fall are peak seasons for inspection on these homes. Crown repair done early is far cheaper than rebuilding the top of a stack.
On a typical Fox Chase job, a homeowner calls about a draft that won’t draw or soot staining near the smoke chamber. A Level 2 inspection with a camera often finds a flue cracked by freeze-thaw, mortar joints in the exterior gable gone soft and spalling, and a crown that cracked and is letting meltwater in. A qualified local pro documents the flue interior on camera, repoints or tuckpoints the masonry, repairs the crown and flashing at the roofline, and only then talks through whether a HeatShield-resurfaced or new stainless liner is warranted for the appliance actually venting into the stack. Many of these Fox Chase chimneys were converted from coal to gas or oil without a properly sized liner, which is exactly the kind of condition the camera is there to catch.
Pricing for Chimney Repair in Fox Chase, PA
Repair pricing is set per job by a written estimate, but here are the typical ranges we see in the Fox Chase market so you know roughly what to expect. A typical mortar repointing job on an exposed gable stack runs $600 – $1,800 depending on how much of the stack needs cutting out. Spalling brick repair with replacement brick runs $500 – $1,500. Chimney waterproofing after repairs typically runs $350 – $650. Flashing repair runs $300 – $750, and a chimney crown repair or rebuild runs $450 – $1,200. Full chimney rebuilding on a badly deteriorated stack starts around $3,000 and rises with height and extent. The written estimate you get sets the final price, and the estimate is free. Call (866) 780-1537 for an exact quote.
We Also Serve Cities Near Fox Chase
We work with homeowners across Fox Chase and the surrounding neighborhoods. If you’re just outside the area, we also connect homeowners with local pros in Cheltenham Village, Oxford Circle, Rhawnhurst, and Mayfair. Same specialist approach, same camera-first inspections and written estimates. If you’re on the edge of Fox Chase, call and we’ll confirm coverage before booking. Our chimney repair team handles the full range, from repointing to full rebuilds.
Serving Fox Chase, PA – Our Local Coverage Area
We serve Fox Chase and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Fox Chase
Yes, both sides should be inspected before any repair when a twin shares a chimney mass. A shared stack means party walls and a single masonry structure, so work on one flue can affect the other, and coordinating the two inspections up front avoids surprises and repeat visits. Call (866) 780-1537 and we’ll help you line up both sides. Estimates are free.
Not necessarily, and it shouldn’t be assumed safe without a camera inspection. Coal-era flues were sized for a coal furnace, and when the stack was re-vented for gas or oil, a liner sized for the new appliance often wasn’t installed. A camera inspection shows whether the original flue is cracked, oversized for the appliance, or missing a liner. Call (866) 780-1537 for an exact quote on inspection and any needed lining.
You ask to see the camera footage and the photo report before agreeing to anything. That’s the standard we hold to: nothing is recommended without camera evidence you can see for yourself, and we’ll say plainly when a repair can safely wait. You should be able to tell repointing and crown repair apart from unnecessary relining. Call (866) 780-1537 for an honest, evidence-based estimate.
It’s freeze-thaw. Snowmelt soaks into the brick and mortar on the exposed gable stack, refreezes overnight, and pushes the surface apart, so the damage shows up each spring and looks worse than it did in the fall. That’s why spring and fall are the peak inspection seasons here, and why repointing and crown repair early save money later. Call (866) 780-1537 to book an inspection.
Yes, an annual inspection is still worthwhile even if you rarely burn. Low use doesn’t stop the freeze-thaw damage to an older Fox Chase stack, and it doesn’t catch a cracked crown, loose flashing, or an orphaned coal-era flue that’s now venting a furnace. An inspection confirms the flue is intact and the appliance is venting safely. Call (866) 780-1537 to schedule one, and estimates are free.
Whether you’ve got a draft that won’t draw, mortar crumbling off a gable stack, or a 1920s flue you’re not sure is safe, we can help. We’ll connect you with a vetted local professional who documents everything on camera, explains what needs doing and what can wait, and puts the price in writing before work starts. One specialist covers it from the sweep to the crown: cap, crown, liner, firebox, all maintained as a whole. Call (866) 780-1537 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Holmesburg.