Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Liner & Rebuild for Holmesburg Homeowners
A chimney liner contains the smoke, heat, and carbon monoxide that a fire produces, and it holds the flue’s clearances to combustible wood framing. When the liner cracks, gaps, or pulls away from the flue walls, those gases can reach places inside the chimney structure and the house that they were never meant to reach. Rebuilds handle what the liner can’t: spalled brick, failed mortar joints in the stack, and a crown that no longer sheds water. Our technicians have up to 8 years of experience with stainless steel and flexible liner systems and full chimney rebuilds, and we work in Holmesburg with material makers like DuraFlex and HeatShield that suit the older rowhouse and twin chimneys common on these blocks. Same-day availability fits most visits. Call (866) 780-1537 for a free estimate.
What Our Chimney Liner & Rebuild Service Includes
Liner work and rebuild work solve different problems, and a good inspection tells you which one you’re facing. Here’s what each part of this service covers.
Stainless Steel Liner
A stainless steel liner is a rigid or semi-rigid flue pipe dropped into the chimney to give the fire a proper, continuous vent. You need one when a clay tile flue has cracked, when there’s no liner at all in an older chimney, or when a wood stove or insert vents through a flue sized for something else. We size the liner to the appliance’s venting requirements and the flue’s actual dimensions, then insulate and cap it so it performs as a complete system.
Flexible Liner
A flexible liner is a corrugated stainless flue pipe that bends through offsets and turns a rigid pipe can’t follow, which makes it the practical choice for the many Holmesburg chimneys that were built with a jog in the flue. It comes into play on re-lines, appliance conversions, and retrofit installations where the existing tile can’t be salvaged but the surrounding masonry is sound. We carry DuraFlex flexible systems for exactly these jobs, and we pick the liner to match your fuel type and flue, not the easiest one to install.
Liner Replacement
Liner replacement means pulling out a failed or undersized liner and installing a new one rated for the appliance that will actually vent through it. It’s the right call when the old liner is deteriorated past repair, when a previous installation was sized wrong, or when you’re changing what the chimney serves. We inspect the full flue before we recommend replacement, so you’re not paying for a new liner when a repair would hold.
Partial Rebuild
A partial rebuild addresses the chimney above the roofline or the section around the flue without tearing down the whole stack. It fits the case where brick faces are spalling, mortar joints have washed out, or a section of the stack has loosened while the lower chimney is still solid. We remove the failed courses, rebuild with new brick and mortar to match, and reset the crown and cap so the repaired section is protected from the weather.
Full Chimney Rebuild
A full chimney rebuild is the option when the masonry is failing from the ground or roofline up: leaning, crumbling, or so deteriorated that patching won’t hold. We take the stack down to a sound base, rebuild the brick and flue, and finish with a new crown and cap. It’s the largest job in this category, and we only recommend it when the inspection shows the structure can’t be saved any other way.
Liner Repair
Liner repair covers the middle ground: a liner that’s damaged in spots but not gone, or mortar joints inside the flue that have started to erode. We resurface deteriorating joints with the HeatShield ceramic system, which restores a smooth, sealed flue surface without full demolition, and we repair isolated cracks and gaps where the liner is otherwise sound. Recovery is often far less disruptive than homeowners expect. If a repair can safely wait, we’ll tell you that too.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Liner & Rebuild
We work with a set of industry-grade brands because liner and rebuild work depends on the material matching the flue. DuraFlex flexible liner systems are part of our regular service mix for re-lines and appliance conversions, and we know where that corrugated pipe wears or kinks on an install. HeatShield’s ceramic resurfacing system gives us a way to address deteriorating mortar joints without tearing out a chimney, and we use it where the joints are the problem and the surrounding masonry is still sound.
Gelco and Olympia Chimney round out the brands we’re authorized to work with, covering the liner, cap, and venting components that hold a chimney system together. When we inspect a flue, we can tell you whether the existing material is salvageable or whether it’s time to replace it with a liner specified for your fuel type. Whether you have DuraFlex, HeatShield, Gelco, Olympia Chimney, or any other make, we can help.
Signs You Need Chimney Liner & Rebuild Right Now
- Crumbling or flaking brick on the stack. Spalling brick and washed-out mortar joints let water in and signal that the masonry is losing its grip. Left alone, this moves from a repair to a rebuild.
- White staining on the chimney exterior. Efflorescence is mineral salt pushed out by moisture moving through the brick. It’s a sign water is getting in, often through a failed crown or cap or a chimney that’s absorbing rain.
- A smoky smell or smoke backing into the room. Smoke that won’t draft up the flue can mean a blocked, sized-wrong, or damaged liner. It’s also a carbon monoxide consideration, so it’s worth a look before the next fire.
- Cracked or missing flue tiles seen at the top. A visual check of the flue from above or below can reveal gaps in the clay tile that a liner is meant to seal. Gaps in the flue are exactly how heat and gas reach the wood framing.
- A chimney that leans or has loose sections. Any movement in the stack points to a structural problem that a liner alone won’t fix. A leaning chimney needs a rebuild evaluation, not a patch.
Our Chimney Liner & Rebuild Process – Step by Step
- 1
Inspection and camera work. We start with a visual inspection and camera scan of the flue so we can see the full run of the interior, not just the part that’s easy to reach. You get a report and photos of what the camera found, so you’re looking at the same evidence we are.
- 2
Diagnosis and options. We explain what the inspection shows and lay out the realistic choices: repair, resurface, re-line, or rebuild. If a HeatShield resurfacing would do the job of a full liner replacement, we’ll say so and let you weigh the cost against it.
- 3
Written estimate. You get a clear, itemized estimate with the materials specified, so you know what’s being installed and why before any work begins. The written estimate sets the final price.
- 4
Installation or rebuild. On liner work, we size, insulate, and set the new liner and connect it to the appliance. On rebuilds, we take the failed masonry down and rebuild with new brick and mortar, then reset the crown and cap.
- 5
Final check and walkthrough. We test the draft, confirm the cap and crown are seated, and walk you through what was done. The system is checked as a whole, from firebox to cap.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Holmesburg?
Liner and rebuild pricing depends on the flue’s dimensions, the fuel type, and how much masonry has to come down, so these are typical ranges rather than a quote. A typical stainless or flexible liner installation in Holmesburg runs $2,000 – $4,500 depending on flue height, liner diameter, and whether insulation is added. Liner repair or HeatShield resurfacing often lands in the $1,000 – $2,500 range when the flue can be saved. A partial rebuild above the roofline usually runs $2,500 – $6,000, and a full chimney rebuild runs higher, often $8,000 and up, because it involves rebuilding the stack, flue, and crown.
What moves the price: flue size and height, whether there are offsets, fuel type and appliance venting requirements, and how much deteriorated masonry has to be removed. A much higher quote from another contractor isn’t automatically wrong, but ask them to tie it to a camera inspection and photos. You avoid overpaying by getting the inspection first and asking for repair-versus-replace options in writing. Our estimate is free, includes the camera inspection and photo report, and states what’s included so the written estimate is the final price. Call (866) 780-1537.
Chimney Liner & Rebuild Near Holmesburg – Our Service Area
We cover Holmesburg and the surrounding Northeast Philadelphia neighborhoods, including Mayfair, Rhawnhurst, Tacony, Torresdale, Oxford Circle, Fox Chase, Bustleton, and Frankford, as well as Eddington and Bryn Athyn just across the county line. Whether you’re near the river or farther out, a Chimney Sweep Holmesburg visit starts with an inspection and a written estimate. If your liner or masonry needs attention, we also handle chimney liner & rebuild work for homes in Eddington and chimney liner & rebuild work in Bryn Athyn. Call to book and we’ll confirm a window.
Serving Holmesburg, PA – Our Local Coverage Area
We serve Holmesburg and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Liner & Rebuild in Holmesburg
Chimney liner and rebuild service covers the structural and venting parts of a chimney: installing or repairing the liner that carries smoke and gases out, and rebuilding masonry that has failed. A liner is the flue’s inner pipe; a rebuild is new brick and mortar for the stack and crown. This specialist service handles both so the chimney is fixed as one system, from firebox to cap. Call (866) 780-1537 for a free estimate.
A liner installation usually takes a day for most homes, while a partial rebuild typically takes two to three days and a full rebuild takes longer depending on scope. The exact schedule depends on the flue, the materials, and weather. We give you a realistic timeline in the written estimate before work starts. Call (866) 780-1537 to book an inspection and get a timeline for your chimney.
A typical chimney liner installation in Holmesburg runs $2,000 – $4,500, and liner repair or resurfacing often runs $1,000 – $2,500, depending on flue size, height, and fuel type. A partial rebuild typically runs $2,500 – $6,000, and a full rebuild runs higher. The written estimate sets the final price and includes the camera inspection. Call (866) 780-1537 for an exact quote; estimates are free.
Yes, we work with DuraFlex flexible liner systems and the HeatShield ceramic resurfacing system, along with Gelco and Olympia Chimney components. If your existing liner is DuraFlex or another make, we can inspect it and tell you whether it’s repairable or due for replacement. We specify the right material for your flue rather than the easiest one to install. Call (866) 780-1537 to book an inspection.
Same-day availability fits many inspections and routine liner jobs, though rebuilds are scheduled because they take longer. We answer 24/7, and we dispatch technicians 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (866) 780-1537.
Our workmanship is backed by a satisfaction guarantee, and liner materials carry the manufacturer’s warranty for the product we install. The written estimate spells out what’s covered so you know before work begins. If something isn’t right after the job, we come back to make it right. Call (866) 780-1537 for details on your specific project.
Clear the area around the hearth and fireplace, and if you can, move furniture and anything breakable away from the work zone. We’ll need access to the roof or the top of the chimney, so let us know about pets and any gate or parking concerns ahead of time. Everything else, including the inspection, camera work, and cleanup, we handle. Call (866) 780-1537 to confirm your appointment.
Schedule Your Chimney Liner & Rebuild Service in Holmesburg Today
From a failed liner to a stack that needs to come down and go back up, one specialist handles the whole job. Call (866) 780-1537 for a free, no-obligation estimate with camera inspection and photo report included. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Holmesburg.