Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Holmesburg?
Chimney liner work in Holmesburg typically costs $1,800-$4,200 for a standard stainless re-line, while a partial rebuild of the upper stack runs $3,000-$7,500 and a full chimney rebuild runs $8,000-$18,000 depending on height and access. HeatShield resurfacing, which repairs deteriorating mortar joints without demolition, usually lands between $1,200 and $2,600. The only number that matters is the one on your written estimate, but those ranges are what Holmesburg homeowners should expect in 2026.
Holmesburg’s rowhouses and older detached homes are mostly early-1900s construction, and a great many of them still have clay tile flues that have cracked, spalled, or separated after a century of heating cycles. That’s the reason liner and rebuild quotes here so often come in higher than the homeowner expected. Once tiles fail, the flue no longer safely contains combustion gases, and the fix is either a new liner inside the old chase or a rebuild of the stack itself.
Every estimate we write is free, and the price is set per job from that written estimate. Call (866) 780-1537. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Standard stainless re-line in Holmesburg: $1,800-$4,200, depending on flue length, liner type, and appliance.
- HeatShield resurfacing is often $1,200-$2,600 and can replace a full liner when tiles are cracked but structurally sound.
- Full chimney rebuilds in Holmesburg run $8,000-$18,000, driven mainly by stack height and roof access.
- Our technicians have up to 8 years of experience, and we specify liner materials by flue type and fuel type, not by what’s easiest to install.
- A failed liner is a fire and carbon monoxide hazard. Get a written estimate before anything else.
Chimney Liner & Rebuild Cost Breakdown (2026)
Here’s how the numbers break down by line item for the Holmesburg market. These are typical estimates, not exact quotes. The written estimate you receive sets the final price.
| Service | Typical Cost Range |
|---|---|
| Inspection / camera scan of the flue | Free with estimate |
| HeatShield ceramic resurfacing (partial) | $1,200-$2,600 |
| 6″ stainless flexible liner (single appliance) | $1,800-$3,200 |
| Insulated stainless liner, wood stove | $2,400-$4,200 |
| Rigid stainless liner (straight flue, no offsets) | $2,600-$4,000 |
| Crown rebuild (masonry, standard) | $600-$1,400 |
| Crown rebuild with cap integration | $900-$1,800 |
| Upper stack rebuild (top 6-8 feet of masonry) | $3,000-$7,500 |
| Full chimney rebuild (ground to cap) | $8,000-$18,000 |
| Firebox rebuild (brick and mortar) | $1,600-$3,800 |
| Chimney cap (stainless, custom-fit) | $350-$900 |
| Damper replacement | $350-$850 |
What drives those numbers up or down: the length and shape of the flue, whether the chase is straight or has an offset, the fuel type (gas, oil, or wood), whether the existing tiles are still structurally sound enough for resurfacing, and how much scaffolding or roof access the job requires. A straight flue on a rowhouse with easy roof access is a much different job than a tall detached chimney with a complex crown and a 90-degree offset partway down. We work with DuraFlex and rigid liner systems so we can match the right solution to the flue rather than force one style of liner into every chimney.
What doesn’t affect the price is the time of day or the urgency of your call. We don’t add premiums for fast turnaround. The price is set per job by the written estimate.
What Affects Chimney Liner & Rebuild Pricing in Holmesburg
Holmesburg sits in Northeast Philadelphia, and the housing stock shapes the cost as much as anything else. Here are the factors that move the number most:
- Stack height and roof access. A taller chimney means more material, more scaffolding, and more labor. A two-story rowhouse chimney with easy roof access is at the bottom of the range; a steep-roofed detached home with a tall stack sits closer to the top.
- Original clay tile condition. In these older Holmesburg homes, the original clay liners have often cracked or spalled from a century of heating and cooling. If the tiles are sound, HeatShield resurfacing can save most of the cost of a full liner. If they’ve failed structurally, a new liner is the only option.
- Flue shape and offsets. Straight flues take a flexible liner easily. Offsets, bends, or irregular shapes in older masonry can require more careful work or a rigid liner, which pushes the cost up.
- Fuel type and appliance. A wood-burning stove typically needs an insulated liner, which costs more than an uninsulated gas or oil liner. Matching the liner material to the fuel type is not optional; the wrong liner will fail early.
- Masonry movement and water damage. Older Holmesburg chimneys often show spalling brick and soft mortar at the crown. If water has been getting in, the rebuild scope grows. A crown and cap installed in the same visit prevents this from recurring.
- Whether the firebox needs work. If the firebox bricks and mortar are also failing, that’s a separate line item. We handle the firebox as part of the same job so you’re not calling a second contractor mid-project.
If your home has a liner failure, the choice between resurfacing and replacement is the single biggest cost driver. HeatShield ceramic resurfacing addresses deteriorating mortar joints in the existing clay without demolition, and it’s available where a full replacement isn’t necessary. That option isn’t something sweep-only companies typically offer, and it’s one reason we get called to second opinion quotes.
How to Save on Chimney Liner & Rebuild
Chimney work isn’t the place to shop on price alone, but there are real ways to bring the estimate down without compromising safety:
- Get the inspection first. A camera scan will tell you whether resurfacing will do the job. If the tiles are cracked but structurally sound, HeatShield can save most of the cost of a full re-line.
- Bundle crown and cap work with liner work. If the crown and cap need attention anyway, doing them in the same visit is less expensive than a return trip. It also protects the investment in the new liner by keeping water out.
- Keep up with annual sweeps. Annual sweeping is far cheaper than repairing the damage a neglected flue causes. Regular inspection catches cracked tiles before they become a full rebuild. See our chimney sweep Holmesburg page for how the annual sweep works.
- Don’t delay a rebuild. A failing crown lets water into the masonry, which accelerates spalling and can turn a $900 crown job into a $7,500 upper stack rebuild within a few seasons.
- Get a written, itemized estimate. Estimates are free. A line-item quote tells you exactly what you’re paying for, so you can compare quotes honestly.
We work with a curated roster of industry-vetted brands: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. That means we’re not locked into one liner manufacturer’s product line, and we can pick the material that fits your flue and budget rather than the one that’s easiest to source.
When a Liner Repair Is the Wrong Call in Holmesburg
Homeowners sometimes ask us to “patch” a flue that’s already failed. We don’t do that, and here’s why: a chimney liner is a containment system for combustion gases and heat. If the tiles are structurally broken, no amount of patching restores the containment. HeatShield resurfacing is a genuine repair when the mortar joints are deteriorating but the tiles are stable. But if a tile has cracked through or shifted, the only safe answer is a new liner, and any contractor offering a patch on a failed tile is selling you a hazard. If a rebuild is needed, do the rebuild. We work with the brands above because they hold up under the conditions a Holmesburg flue actually sees, including wood, oil, and gas fuel types.
What Happens When You Call
A call to (866) 780-1537 gets you a free estimate appointment. The technician inspects the flue, the crown and cap, the firebox, and the top of the stack. You get a written, itemized estimate before any work begins; the price is set per job by the written estimate. If a full liner is not needed, we’ll tell you that. If HeatShield resurfacing will do the job, we’ll quote it. If a rebuild is the only safe path, we’ll explain what the rebuild involves and why the alternatives aren’t safe. Our technicians have up to 8 years of experience, and single-company accountability from inspection through repair completion means specialty work isn’t subcontracted out to a second trade. Fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturdays.
FAQs – Chimney Liner & Rebuild Cost
How much does a chimney liner cost in Holmesburg?
A standard stainless liner in Holmesburg typically costs $1,800-$3,200 for a single appliance; an insulated liner for a wood stove runs $2,400-$4,200. The written estimate sets the final price based on flue length, shape, and fuel type. Call (866) 780-1537 for a free quote.
Is it cheaper to reline or rebuild a chimney?
Relining is almost always cheaper: a standard re-line runs $1,800-$4,200, while a full rebuild runs $8,000-$18,000. Rebuilding is only necessary when the masonry itself is failing, not just the tiles. The inspection tells you which scenario you’re in. Call (866) 780-1537 and we’ll explain what your flue needs.
How much does a chimney rebuild cost in Holmesburg?
A full chimney rebuild in Holmesburg typically runs $8,000-$18,000; a partial upper stack rebuild runs $3,000-$7,500. The price depends mainly on stack height and roof access. Call (866) 780-1537 for a free estimate.
Can HeatShield save me money over a full liner?
Yes, if the tiles are cracked but structurally sound: HeatShield resurfacing runs $1,200-$2,600, versus $1,800-$4,200 for a new liner. It addresses deteriorating mortar joints without demolition. The inspection tells you whether it’s the right fit. Call (866) 780-1537 for a free assessment.
Can you come today?
Same-day service is often available. We answer 24/7, and with fast dispatch from 7am to 7pm, many Holmesburg homeowners get an inspection the same day they call. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (866) 780-1537 for a free estimate.
Why a Chimney Specialist Instead of a Generalist
Chimney work has a narrow set of codes, materials, and failure modes, and it doesn’t overlap much with general masonry or handyman work. A rebuilt crown needs the right mix and pitch. A liner needs to match the fuel type and be sized to the appliance. Firebox brick needs the right refractory mortar. These details take a specialist. That’s what we are: a full-service chimney specialist covering sweeps, cap and crown installation, repair, liner installation and rebuilds, and fireplace repair. Our technicians work with DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield because those are the brands that professional chimney technicians specify. You can read more about our chimney liner & rebuild work and the options available for older Holmesburg flues.
If your chimney has never had a documented inspection, or if you’re buying a home with a fireplace and want a straight answer about its condition, call us. The estimate is free, the scope is based on what we find, and the final price is on paper before any work starts.
Call (866) 780-1537. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Same-day service is often available, and the estimate is free.
Pricing reflects the Holmesburg market as of 2026. Chimney Sweep Holmesburg offers free estimates. Call (866) 780-1537.
Written by the team at Chimney Sweep Holmesburg.
What Our Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Bethany Rhodes"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Danika Carter"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Whitney Padgett