Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Frankford
If your chimney crown is crumbling or smoke is spilling from your firebox into the room, you’re looking at a repair that can’t wait through another freeze-thaw cycle. We’re Chimney Sweep Holmesburg, and we handle chimney repair in Frankford from routine repointing up through full rebuilds of shared party-wall stacks. Frankford’s brick rows are their own animal, and we know the territory: rear-alley ladder access, mutual easements, flues built for coal that now vent gas, chips of face brick spalling off the exterior breast. Our technicians have up to 8 years of experience, and everything we recommend comes with camera evidence you see for yourself before a single dollar gets committed. Call (866) 780-1537 for a free estimate.
Why Frankford Homeowners Call Chimney Sweep Holmesburg for Chimney Repair
Frankford is one of the few places in Northeast Philadelphia where a chimney job routinely means climbing a rear alley because there’s no other way to reach the stack. That’s our normal. We know the dense blocks of 2-3 story brick rowhouses that went up between the 1890s and the 1930s, the exterior chimney breasts, the shared masonry stacks between neighbors. If you’ve got a rowhouse on a narrow Frankford street, the technician who shows up already understands the layout before he puts a ladder against the wall.
Our local reputation in Frankford rests on one thing: we don’t sell liner work or masonry repairs on a hunch. A Level 2 inspection with a camera comes first, and the footage goes on a screen in front of you. That’s the standard we hold on every Frankford call. Our technicians have up to 8 years of experience, and we work with professional-grade brands we trust in the trade: HeatShield, DuraFlex, Gelco, and Copperfield. No generic knockoff liner gets installed on our jobs.
Response to Frankford is quick because it sits right in our service area. We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Same-day service is available when the schedule allows.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Frankford
Six categories cover every chimney repair in Frankford we do: sweeping, cap and crown work, repair, liner installation and rebuilds, and fireplace repair. On this page we’re focused on the structural repairs that Frankford’s older brick so often needs.
Mortar Repointing
In a Frankford rowhouse, the mortar joints on an exterior chimney breast take the brunt of freeze-thaw winters. Water gets into a hairline crack, freezes, expands, and the mortar softens from the inside out. Repointing puts sound mortar back in the joint before the brick itself starts to fail. We match the mortar blend to the age and type of brick so the repair doesn’t trap moisture or crack the faces around it.

Spalling Brick Repair
That whitish bloom on the exterior breast of a Frankford chimney is efflorescence, and the flaking brick behind it is spalling. It’s almost always the result of water getting in through a cracked crown or failed flashing and working its way through the masonry. Repointing alone won’t fix a spalling brick problem; the source of the water has to be closed first.

Chimney Waterproofing
Waterproofing a Frankford chimney means stopping the water at the top and letting the masonry breathe. We reseal the crown, repair any flashing failures around the stack, and apply a vapor-permeable waterproofing treatment to the brick. It doesn’t trap moisture inside the way a paint-on sealer does, and it’s the single most cost-effective protection for a 1920s rowhouse chimney.

Flashing Repair
Failed flashing around the base of the chimney lets water run straight down into the flue and the ceiling below it. In Frankford’s rowhouses, the flashing line often runs along a shared party-wall stack, so a leak there can show up in either neighbor’s ceiling. We cut out the old flashing, rebuild the seal against the brick, and confirm the joint is watertight before the job closes out.
Trusted Brands We Service in Frankford
We specify the right liner material for the flue, the fuel, and the budget, not the brand that’s fastest to install. For Frankford’s shared party-wall stacks and coal-era flues, we work with HeatShield ceramic resurfacing, DuraFlex flexible liner systems, Gelco, and Copperfield. HeatShield is often the answer when the mortar joints have deteriorated but a full liner replacement isn’t necessary. DuraFlex handles the retrofit and re-line work on flues built for coal that now vent gas or oil. We don’t claim to keep parts stocked on a truck. We specify professional-grade materials, and we source them per job.
Common Chimney Repair Problems We See in Frankford Homes
Frankford’s 1890s – 1930s brick rows share party-wall stacks, and the condition that causes the most trouble is a flue that serves both sides of the wall. Most suburbs and newer city neighborhoods don’t have this problem. Here’s what else shows up again and again.
- Cracked crowns and failed flashing letting freeze-thaw water in. Northeast Philadelphia’s winters cycle above and below freezing enough times to open a hairline crack into a real defect. Once water is inside an already spalling unlined or clay-tile flue, the mortar softens from the inside out. Repointing without stopping the water is a losing battle, so we fix the crown and flashing first.
- A shared party-wall stack that back-drafts smoke and carbon monoxide from a neighbor’s flue. On Frankford’s narrow rowhouse streets, one flue can serve both sides of the wall. When the adjoining liner fails or the neighbor’s flue blocks up, smoke and carbon monoxide push back into your living room. It’s a shared-stack hazard most suburbs simply don’t have, and it’s the reason a camera inspection on a shared stack matters here more than it does almost anywhere else in the city.
- Crude retrofits for gas or oil in flues built for coal. Frankford’s chimneys were originally built for coal and later adapted for gas or oil without resizing the flue. The result is an undersized flue with poor draft and, on wood-burning inserts, third-degree creosote glaze that a brush alone cannot remove. A proper reline sized to the appliance is the usual answer.
- Spalling brick on the exterior breast. That whitish bloom and flaking face on the exterior of a Frankford chimney is water damage looking for a way out. It’s almost always tied to a bad crown or flashing detail. Left alone, it spreads to the shared stack and the neighbor’s wall.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Frankford, PA
Chimney repair in Frankford typically runs from about $300 for a focused flashing repair up to $6,000 or more for a full rebuild of a shared party-wall stack. We give honest ranges, not a “call for pricing” runaround, and the written estimate sets the final price after the inspection.
- Mortar repointing: typically $400 – $1,200 depending on how much of the stack is affected
- Spalling brick repair: typically $500 – $1,500
- Chimney waterproofing: typically $350 – $800
- Flashing repair: typically $300 – $900
- Chimney rebuilding: typically $2,500 – $6,000 for most Frankford rowhouse stacks
- Tuckpointing: typically $500 – $1,400
What pushes a Frankford job toward the top of a range: a shared party-wall stack that needs work on both sides, ladder access through a rear alley that adds setup time, or a full crown rebuild bundled with repointing. What keeps it low: a single flashing repair with clean access and no liner involvement. The estimate is free, and the price is set per job by the written estimate. Nothing gets recommended without camera evidence you can see for yourself.
We Also Serve Cities Near Frankford
Frankford is our home base, but chimney repair in Frankford doesn’t stop at the neighborhood line. We also serve homeowners in Oxford Circle, Tacony, Mayfair, and Fox Chase, all of which share the same 1920s-era brick rowhouse building stock and the same freeze-thaw wear on crowns and flashing. If you’re just outside Frankford, call us. The shared party-wall stack problem is the same on your block. You can read more about our full chimney repair service, or if you’re across the line see our Frankford page for the neighborhood picture.
Serving Frankford, PA – Our Local Coverage Area
We serve Frankford and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Frankford
Yes, in most cases we can repair just your side of the shared stack. On Frankford’s party-wall stacks, the flue serving your side can usually be addressed without opening the neighbor’s wall. There are exceptions: if the crown is a single shared unit, or the flashing detail runs continuous across both sides, the repair has to touch both. We photograph what we find and explain exactly why before recommending anything beyond your own side.
Water is getting into the masonry and freezing, and that’s why the repair keeps failing. Repointing a Frankford chimney without first fixing the crown and flashing is a temporary patch. Northeast Philadelphia’s winters cycle above and below freezing enough to push a hairline crack open, and a vapor-tight sealer traps the moisture inside instead of keeping it out. The fix is the crown, the flashing, and a breathable waterproofing coat in that order.
Not necessarily, and that’s the single most common problem we find in Frankford. A flue built for coal is usually too large for a modern gas or oil appliance, so the exhaust cools before it gets out and draft gets unreliable. That’s a real carbon monoxide risk, not a theoretical one. A camera inspection shows whether the flue is the right size for the appliance it now serves, and if it isn’t, a DuraFlex or rigid liner sized for the appliance is the usual answer. We work with your insurer where needed, but the call is a safety call first.
You can’t tell by looking from the firebox, and neither can a sweep without a camera. Creosote glazes in stages: first-degree is powdery and a brush removes it, second-degree is flaky and crusty, and third-degree is a hard, glazed layer a brush alone can’t touch. Third-degree creosote is a real chimney fire risk, which is why we always run a camera inspection before recommending treatment on a Frankford wood-burning insert. You see the footage yourself before we propose anything.
Often, yes, and that’s normal on a Frankford rowhouse street. The rear-alley layout on most of these blocks means ladder access comes from the alley rather than the front, and many chimneys sit back on a mutual easement. We confirm the access route with you before the appointment. If the only safe way up is across a neighbor’s property line, we’ll tell you that up front so it’s no surprise on the day.
Book a Chimney Repair in Frankford
If your chimney crown is cracked, your brick is spalling, or smoke is drafting back into the house, that’s a repair to get ahead of before the next hard freeze. From annual sweep to full liner rebuild, one specialist, one call. The estimate is free, the price is set per job by the written estimate, and nothing is recommended without camera footage you see with your own eyes. Call (866) 780-1537. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Chimney repair in Frankford, done by a specialist who knows the stacks.
Written by the team at Chimney Sweep Holmesburg.