Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Fox Chase
If your fireplace has sat unused since last winter, or the brick stack on the side of your twin is showing its age, we can help. We’re a chimney-and-fireplace specialist, and we handle the sweep, the inspection, and the repair that follows. We know Fox Chase well, from the rowhouse-era brick stacks on the gable ends to the older twin homes where two flues share a single masonry mass. Our technicians have up to 8 years of experience, they arrive with a camera and a written scope, and nobody recommends work you can’t see for yourself. Call (866) 780-1537 to book a sweep in Fox Chase. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Fox Chase Homeowners Call Chimney Sweep Holmesburg for Chimney Sweep
We’re the specialist people in Fox Chase call when a handyman won’t do. That’s not a knock on generalists. It’s just that a chimney in this part of Northeast Philadelphia is rarely a simple sweep-and-go job, and the person looking up your flue should be the one who can also read the mortar, the crown, and the flashing at the roof line.
Our reputation here has been built one carefully documented inspection at a time. We don’t hand out vague warnings or push a liner on the first visit. We sweep, we scan with a camera, and we show you the photos so the decision is yours. If the flue is sound and can safely wait another season, we say so. If you’d rather read what the full chimney sweep service covers before you book, it’s all laid out there.
Response time to Fox Chase is short. The neighborhood sits on the Northeast’s grid, so a sweep can usually be scheduled within the week, and the truck rolls with everything the job needs so you aren’t waiting on a second appointment for a cap or a bit of crown work. Our technicians have up to 8 years of experience on stacks exactly like the ones here.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Sweep Services in Fox Chase
A full-service chimney specialist handles the whole system, cap to firebox, so nothing gets looked at in isolation. Here’s what a typical visit to a Fox Chase home involves.
Level 1 Inspection
This is the routine annual check that goes with a sweep. We look at the accessible parts of the flue, the firebox, the damper, the cap, and the visible exterior of the stack. In Fox Chase, where many homes have original masonry chimneys, a Level 1 walk-through is where cracked crowns and loose mortar joints first show themselves, before they become a roofing problem.

Level 2 Inspection
A Level 2 inspection adds video scanning of the flue interior, and in Fox Chase this is the inspection that earns its keep. Twins and attached homes here often share a single masonry mass, and the only way to confirm your flue is intact and venting independently of your neighbor’s is to look inside it with a camera. We recommend a Level 2 after any conversion, a change of appliance, or a suspected problem.

Creosote Removal
Creosote is the tar-like residue that builds up when wood burns incompletely, and in older unlined or clay-tile flues it stays tacky and acidic through humid summers. We remove glaze and heavy deposits with the right tools for the flue type, not a stiff brush and hope. Removing creosote is the single most effective thing you can do to lower the risk of a chimney fire.

Soot Removal
Soot is the finer, powdery layer left behind after creosote, and it collects in the smoke chamber, on the damper, and across the firebox. Left alone it drifts into the room on the next draw and stains whatever it lands on. We clean the firebox and smoke shelf thoroughly and contain the dust as we go, so your living room looks the same when we leave as when we arrived.
Trusted Brands We Service in Fox Chase
Material knowledge matters when a repair is needed, and it’s the difference between patching a flue and properly restoring it. We specify professional-grade products from DuraFlex and HeatShield, among other vetted brands, and we choose the material for your flue type, fuel type, and budget rather than the one that’s easiest to install. HeatShield’s ceramic resurfacing can restore a deteriorating flue without full demolition, and DuraFlex flexible liners suit retrofits and appliance conversions. We don’t stock parts in Fox Chase: the technician brings the right system, and a follow-up visit for a liner or cap is scheduled once the scope is confirmed in writing.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Fox Chase Homes
The housing stock here tells the story. Fox Chase is built largely of 1920s to 1950s brick and stone singles and twins, many with original masonry chimneys and flues that once served coal or oil furnaces. That history creates a handful of problems that come up again and again.
- Shared party-wall flues. Twins here often share one masonry mass with two separate flues inside it. A failed partition or open joint can let smoke or carbon monoxide drift from a neighbor’s appliance into yours. Before a sweep, we map which flue serves which appliance.
- Spalling parged stacks. Philadelphia’s freeze-thaw winters spall the mortar and crown on exposed exterior stacks. Water gets in, refreezes, and loosens brick. Fallen debris can even block the flue, so spring and fall are peak inspection seasons.
- Old coal-era cleanout doors. Many Fox Chase basements still have the original cleanout door, sometimes left open or unsealed. That opening lets creosote-laden soot escape into living spaces when the chimney is swept, so we check and seal it as part of the job.
- Unlined and clay-tile flues. Original flues that were never lined, or lined with deteriorated clay tile, are common here. They need a camera inspection to judge, and often a HeatShield or DuraFlex solution rather than a full rebuild.
Pricing for Chimney Sweep in Fox Chase, PA
Fox Chase pricing is set by the written estimate, and the estimate is free. Here are typical ranges so you know roughly what to expect:
- A standard annual sweep in Fox Chase typically runs $150 – $250.
- A Level 2 inspection with video scanning typically runs $200 – $400.
- Creosote removal, when deposits are heavy or glazed, typically adds $100 – $300 to a sweep.
- Crown repair or a new cap typically runs $250 – $600 depending on the stack.
What moves the number is the condition of the flue, the access to the roof, and whether the job needs a repair alongside the sweep. Every job is priced per job from the estimate, and nothing proceeds until you’ve seen the camera evidence and agreed to the scope. Call (866) 780-1537 for an exact quote on your Fox Chase chimney. Estimates are free.
We Also Serve Cities Near Fox Chase
We work across the surrounding Northeast Philadelphia neighborhoods and just over the line. That includes Cheltenham Village, Oxford Circle, Rhawnhurst, and Mayfair, each with its own mix of old masonry stacks and newer flues. If you’re just outside Fox Chase and wondering whether we cover your street, a quick call settles it.
Serving Fox Chase, PA – Our Local Coverage Area
We serve Fox Chase and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Sweep in Fox Chase
No, but coordinating the sweep with your neighbor is strongly recommended. In Fox Chase twins the two flues sit inside one masonry mass, so a failed partition or open joint can let exhaust migrate between them. Booking both sides together lets us map the flues and confirm each appliance vents independently. Call (866) 780-1537 to arrange a coordinated visit. Estimates are free.
The reliable way is a camera inspection, because you can’t tell from the outside whether a twin’s stack holds one flue or two. From the ground you can sometimes spot two caps or two separate thimbles in the basement, but the only sure answer comes from video scanning inside. We perform a Level 2 inspection to map the flues and check the dividing wythe. Call (866) 780-1537 to book one.
First-degree creosote is a light, flaky, soot-like deposit you can brush away, and it’s the most common stage in older flues. Second-degree is denser and crustier; third-degree is glazed and tar-like and needs a different removal method. Fox Chase’s humid summers let deposits stay tacky and acidic between heating seasons, so what starts light can deepen. A sweep and inspection tells you which stage you’re at. Call (866) 780-1537 for an exact quote.
Yes, if it’s open, unsealed, or no longer connected to an appliance in use. An open cleanout door in the basement lets creosote-laden soot escape into living spaces when the chimney is swept, and it can also allow exhaust to migrate. We check and seal these as part of the job. Call (866) 780-1537 to have yours looked at. Estimates are free.
The most likely cause is a shared chimney mass with a breach, open joint, or unsealed cleanout letting air move between the two flues. In a Fox Chase twin, a neighbor’s smoke or exhaust can find its way into your side through cracks in the common masonry. That’s a carbon monoxide concern as well as an odor one, so it’s worth a Level 2 inspection rather than air freshener. Call (866) 780-1537 to book one. Estimates are free.
Ready to get your Fox Chase chimney sorted before the heating season starts? Call (866) 780-1537 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. From annual sweep to full liner rebuild, it’s one specialist, one call.
Written by the team at Chimney Sweep Holmesburg.