Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Holmesburg?
Chimney cap and crown work in Holmesburg typically runs about $180 to $460 for a standard stainless cap installed on a masonry chimney, and $350 to $900 for crown repair, with a full crown rebuild landing between $600 and $1,400. Most single-story rowhomes in Holmesburg fall at the lower half of those ranges because the flue is easy to reach and the crown is a modest footprint. The written estimate we provide after an inspection sets your final price.
We’re Chimney Sweep Holmesburg, a full-service chimney sweep in Holmesburg that treats the cap and crown as part of the whole system, not a cosmetic afterthought. Our technicians have up to 8 years of experience with masonry crowns, stainless caps, and the single-flue chimneys that dominate this part of Northeast Philadelphia. Call (866) 780-1537. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Standard stainless caps: roughly $180 to $460 installed.
- Crown repair or resurfacing: roughly $350 to $900.
- Full crown rebuild with new mortar and overhang: roughly $600 to $1,400.
- Custom or multi-flue copper caps: roughly $700 to $2,000-plus.
- Our estimates are free and there’s no charge for the visit.
Chimney Cap & Crown Cost Breakdown (2026)
Here’s how the numbers break down for a typical Holmesburg job in 2026. These are estimated ranges, not a quote. The written estimate is what you pay.
| Line Item | Typical Estimated Range | What’s Included |
|---|---|---|
| Standard stainless steel single-flue cap | $180 – $320 | Cap, mesh screen, bolt-on or slip-in mount, installation |
| Stainless cap on a multi-flue chimney | $280 – $460 | Wider cap, additional mesh, custom fit to a wider crown |
| Galvanized steel cap (budget option) | $140 – $240 | Same footprint as standard, shorter service life |
| Copper cap, single flue | $700 – $1,400 | Fabricated copper, soldered seams, long service life |
| Copper cap, multi-flue or custom | $1,200 – $2,000+ | Custom fabrication, complex mounting, multi-flue coverage |
| Crown repair (crack patching and seal) | $350 – $650 | Cleaning, mortar patching, flexible sealant, light drainage correction |
| Crown resurfacing (flexible or cement coating) | $500 – $900 | Surface prep, bonding coat, protective crown coating |
| Full crown rebuild (remove and re-pour) | $600 – $1,400 | Demo of failed crown, new form, new pour, proper overhang, drip edge |
| Cap and crown combined, standard install | $500 – $1,100 | Both services done in one visit |
The biggest cost driver is what’s already up there. A Holmesburg rowhome with a clean masonry crown and one flue is a fast cap job. A chimney with a failed crown, spalling brick at the top courses, and a badly fitted previous cap can turn a two-hour job into a half-day rebuild. Material choice is second: galvanized is the cheapest and wears out first, stainless is the workhorse, and copper is the long-term answer. We work with recognized brands including Olympia Chimney, Gelco, and Copperfield for caps and crown materials, plus DuraFlex flexible liner systems when a cap install is the moment to also address the flue above a failing liner.
Height matters too. A chimney that rises two stories over the roofline takes longer to access safely than one barely above the ridge, and that shows up in labor. If your crown is failing and your liner is also old, we can quote the crown work and a liner alongside it so the chimney closes back up once. Call (866) 780-1537 for a free estimate.
What Affects Chimney Cap & Crown Pricing in Holmesburg
Six things move the price up or down in this neighborhood. We walk them through with you on site so you can see the reason behind the number.
- The condition of the crown itself. A hairline crack is a $350 to $650 repair. A crown that’s crumbled away from the flue and lets water behind it needs to come off and be re-poured, which is $600 to $1,400. It’s the same chimney and a very different bill.
- Number of flues. Holmesburg has a lot of single-flue chimneys on older rowhomes, and a single-flue cap is the cheapest job on the board. A two-flue chimney with a wide crown steps into the multi-flue range and sometimes into custom fabrication.
- Material and lifespan. Galvanized caps cost the least up front and rust through in fewer years. Stainless tolerates moisture and heat far better. Copper is the spend-more-once answer and can outlast the roof it sits on.
- Chimney height and access. A chimney above a two-story rowhome takes longer and more care than a chimney at the ridge of a small single. Access across a sloping roof, tight side yards, or a chimney close to a neighbor’s wall all factor into labor time.
- Water damage underneath. If a failed crown has been leaking for years, you may find saturated brick or spalled mortar at the top. That repair isn’t crown work; it’s repair before the crown goes back on, and we’ll quote it clearly so nothing is a surprise.
- Whether a liner is also due. We call this the “while we’re up there” quote. If the flue tile is cracked or the mortar joints are deteriorating, we can specify a DuraFlex liner or a HeatShield ceramic resurfacing in the same visit, which is cheaper than two separate visits and better for the chimney.
Chimney Cap & Crown: Why the Price Is Worth Paying
The cap is the cheapest part of the chimney system to install and the most expensive to skip. A properly fitted stainless or copper cap keeps rain, snow, birds, squirrels, and windblown debris out of the flue. Without one, water enters the top of the chimney directly above the flue, soaks into the crown and masonry, and gets into the house or the liner. Every Holmesburg home that’s had water stains on the ceiling near the chimney, an unexplained smell from the fireplace in summer, or a chimney that drafts poorly in high wind is a candidate for a cap diagnosis. The cap is also the part most often missing on older rowhomes where a prior owner removed a rusted cap and never replaced it.
The crown does a different job: it’s the sloped mortar surface on top of the chimney that sheds water away from the brick. A house on a Holmesburg rowhome block sits close to its neighbors, so when a crown cracks and water runs down the exterior brick, that moisture ends up working against both sides of the party wall. Catching it early is $350 to $650. Catching it late, after the brick has spalled and the mortar has gone soft, is closer to a rebuild. The cap and crown are the two components we can quote quickly and install cleanly because we keep the full kit in the service mix, not as a specialty we hand off. If you want to see how they fit with a sweep, look at our chimney cap & crown service page.
A note on doing this yourself: a chimney crown and cap sit at the top of a ladder against a roof, on a surface that’s often wet, and the work involves mixing and laying mortar on a sloped surface while working overhead. That’s steep-roof and height work, and it’s why most homeowners hire it out. The cap itself is a heavy stainless or copper box, and if the crown needs to be re-poured, the work is structural masonry. We recommend leaving that to a trained chimney professional, both for the quality of the finished crown and for the safety of getting to it.
How to Save on Chimney Cap & Crown in Holmesburg
There are legitimate ways to keep the number down without skipping the work.
- Bundle cap and crown. Doing both in one visit saves the setup and access time. A combined cap-and-crown install typically runs $500 to $1,100, cheaper than booking them separately.
- Fix the crown before it fails completely. A $350 to $650 crack repair now prevents a $600 to $1,400 rebuild later. That’s the single biggest saving in this category.
- Choose stainless over galvanized for longevity. It costs more up front, but a galvanized cap that rusts through in a few years means paying for the install twice.
- Ask for the written estimate before work starts. Our estimates are free and itemized, so you know what the crown, the cap, and any repair cost before anyone climbs the ladder.
- Ask about a liner while you’re up there. If the flue needs a HeatShield resurfacing or a DuraFlex liner, adding it to the same visit is cheaper than a separate trip and keeps the top of the system weather-tight when the cap goes back on.
Call (866) 780-1537 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, so the visit gets scheduled quickly and the number you get is the number we stand behind.
FAQs – Chimney Cap & Crown Cost in Holmesburg
How much does a chimney cap cost in Holmesburg?
A standard stainless steel cap costs about $180 to $460 installed in Holmesburg, depending on how many flues the chimney has and whether the crown is wide enough for a standard mount. Galvanized caps start around $140 to $240, and copper caps run $700 to $2,000-plus for custom or multi-flue builds. The cap itself is the smallest line item in most chimney repairs, so it’s worth pricing out even if you have no other reason to call. Call (866) 780-1537 for an exact quote; estimates are free.
How much does chimney crown repair cost in Holmesburg?
Chimney crown repair in Holmesburg typically runs $350 to $650 for crack patching and sealing, and $500 to $900 for a resurfacing coat that covers a larger area of failed mortar. A full crown rebuild, where the old crown is removed and re-poured with a proper overhang, runs $600 to $1,400. The difference comes down to how much of the crown has actually failed. Call (866) 780-1537 for an exact quote; estimates are free.
Is it cheaper to repair or replace a chimney crown?
Repair is almost always cheaper when the failure is limited to surface cracks and the crown still has a solid, sloped shape. That’s the $350 to $650 repair. Replacement becomes the cheaper option once the crown has separated from the flue, lost its slope, or is letting water behind it, since a patch will fail again quickly and the $600 to $1,400 rebuild lasts decades. The useful test is whether the water is running past the crown or into it. Call (866) 780-1537 and we’ll tell you which one applies to your chimney; estimates are free.
Can you install a chimney cap and crown the same day?
Yes, a combined cap and crown install is usually a same-day job in Holmesburg when it’s a standard repair or a straight cap replacement. Same-day scheduling is often possible when you call early. A full crown rebuild or a custom copper cap may take a little longer because of prep and fabrication, and we’ll give you a clear timeline with the estimate. Call (866) 780-1537. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Do I really need a chimney cap in Holmesburg?
Yes, almost every active chimney benefits from a cap, and the $180 to $460 cost is small against the alternative of water and animal damage inside the flue, which is often several hundred to more than a thousand dollars in repair. A cap also keeps sparks from leaving the chimney on a wood-burning fire and keeps birds from nesting in an open flue. Holmesburg rowhomes sit close together, so wildlife and windblown rain reach open flues easily. Call (866) 780-1537 for a free estimate on a cap that fits your flue count and chimney size.
Can a bad chimney crown cause water leaks?
Yes. The crown is the sloped mortar top of the chimney, so a crack or a crown that’s separated from the flue lets water run straight into the brickwork and often into the flue itself, showing up as stains on ceilings or walls near the chimney. Crown repair in Holmesburg typically runs $350 to $650 and closes the leak before the masonry fails. If water has been getting in for years, expect the repair to include some brick or mortar work at the top. Call (866) 780-1537 for an exact quote; estimates are free.
Full-Service Chimney Work, One Specialist
Chimney Sweep Holmesburg handles the full chimney service arc, from the routine annual sweep to a cap and crown install to a full liner rebuild, under one company. That matters when a crown job reveals a flue problem, because the same team that finds it is licensed to fix it and can quote the repair in one written estimate rather than sending you to a second contractor. We work with brands our technicians actually specify: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. Our technicians have up to 8 years of experience with masonry crowns, stainless and copper caps, and the DuraFlex and HeatShield systems we pair with them when the flue needs attention.
If you’ve noticed a cracked crown, a missing or rusted cap, water stains near the chimney, or you simply want the top of your chimney looked at before another season, call (866) 780-1537. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The estimate is free and the written number is what you pay.
Written by the team at Chimney Sweep Holmesburg.
Pricing reflects the Holmesburg market as of 2026. Chimney Sweep Holmesburg offers free estimates – call (866) 780-1537.
What Our Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Bethany Rhodes"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Danika Carter"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Whitney Padgett